Dell Precision 330 - Manual (Page 40)

2. Remove the front panel .
3. Hold the front panel with the front facing you.
4. Remove the front-panel insert for the chassis drive bay you want to use.
Use your thumbs to press the sides of the insert until it snaps free of the front panel (see the following figure).
Removing Front-Panel Inserts (Mini Tower Chassis)
Replacing Front-Panel Inserts (Mini Tower Chassis)
Position the two ring-tabs over the posts on the inside of the bay opening, and then press the ring tabs over the posts. See " Removing Front-Panel Inserts (Mini Tower
Chassis) ."
Back to Contents Page