Dell Precision 330 - Manual (Page 31)

7. If you are removing the card permanently, install a filler bracket in the empty card-slot opening, using the screw you removed in step 5 .
If you need a filler bracket, contact Dell and order part number 81808. See the User's Guide for information on contacting Dell.
8. If you removed the AGP brace, replace it.
9. If you have a mini tower chassis, stand the computer upright.
10. Replace the computer cover and restart the system .
11. If you removed a sound card, perform the following steps:
a. Enter system setup, select Integrated Devices and change the setting for Sound to On.
b. Connect external audio devices to the audio connectors on the system back panel.
12. If you removed an add-in NIC, perform the following steps:
a. Enter system setup, select Integrated Devices and change the setting for Network Interface Card to On.
b. Connect the network cable to the integrated NIC connector on the system back panel.
Back to Contents Page
NOTICE: An AGP Pro50 card may use multiple screws on its bracket. Install all screws on the expansion card's bracket.
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain Federal Communications Commission (FCC) certification of the
system. The brackets also keep dust and dirt out of your computer.