Dell Precision 330 - Manual (Page 39)

Back to Contents Page
Front-Panel Inserts
Dell Precision™ WorkStation 330 Systems Service Manual
Desktop Chassis
Mini Tower Chassis
Desktop Chassis
l Removing front-panel inserts
l Replacing front-panel inserts
Removing Front-Panel Inserts (Desktop Chassis)
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover .
2. Lay the computer cover upside down, with the front panel facing you.
3. Remove the front-panel insert for the chassis drive bay you want to use.
Use your thumbs to press the sides of the insert until it snaps free of the front panel (see the following figure).
Removing Front-Panel Inserts (Desktop Chassis)
Replacing Front-Panel Inserts (Desktop Chassis)
Position the two ring-tabs over the posts on the inside of the bay opening, and then press the ring tabs over the posts. See " Removing Front-Panel Inserts (Desktop
Chassis) ."
Mini Tower Chassis
l Removing front-panel inserts
l Replacing front-panel inserts
Removing Front-Panel Inserts (Mini Tower Chassis)
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover .
CAUTION: Before you perform this procedure, see " Precautionary Measures ."
CAUTION: Before you perform this procedure, see " Precautionary Measures ."