Removing a media memory card or blank – Dell XPS M140 (MXC051, Late 2005) User Manual
Page 72

72
Using the 5-in-1 Media Memory Card Reader
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
To install a media memory card:
1 Hold the card with the top side of the card facing up.
2 Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and
try again.
The computer recognizes the media memory card and automatically loads the appropriate
device driver. If the configuration program tells you to load the manufacturer's drivers, use the
CD that came with the media memory card, if applicable.
Removing a Media Memory Card or Blank
NOTICE:
Use the media memory card configuration utility (click the
icon in the taskbar) to select a
card and stop it from functioning before you remove it from the computer. If you do not stop the card in
the configuration utility, you could lose data.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Press the card in to release and remove the card or blank.
Save a blank to use when no media memory card is installed in the slot. Blanks protect unused
slots from dust and other particles.
1
5-in-1 media memory card
slot
2
media memory card
1
2
book.book Page 72 Wednesday, October 26, 2005 1:00 PM