Dell XPS M140 (MXC051, Late 2005) - Manual (Page 113)

Adding and Replacing Parts 113
you will install a memory module in connector DIMM B. If you are upgrading memory, you may
need to install memory in both the DIMM A and B connectors, depending on the extent of the
upgrade.
Installing a Memory Module in Connector DIMM B
1 Follow the procedures in "Before You Begin" on page 105.
2 Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE: If you leave the area, ground yourself again when you return to the computer.
3 Turn the computer over, loosen the captive screws on the memory module cover, and then
remove the memory module cover.
1 screws (2) 2 memory module cover
1
2
book.book Page 113 Wednesday, October 26, 2005 1:00 PM