Dell XPS M140 (MXC051, Late 2005) - Manual (Page 68)

68 Using ExpressCards
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
The computer recognizes the ExpressCard and automatically loads the appropriate device
driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy
disk or CD that came with the ExpressCard.
Removing an ExpressCard or Blank
NOTICE: Use the ExpressCard configuration utility (click the icon in the taskbar) to select a card
and stop it from functioning before you remove it from the computer. If you do not stop the card in the
configuration utility, you could lose data.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Press the latch and remove the card or blank. For some latches, you must press the latch twice:
once to pop the latch out, and then a second time to pop the card out.
Save a blank to use when no ExpressCard is installed in a slot. Blanks protect unused slots from
dust and other particles.
1 ExpressCard
1
book.book Page 68 Wednesday, October 26, 2005 1:00 PM