Dell PowerEdge R815 - Manual (Page 148)

148 Installing System Components
16 Connect the cables to the system board assembly, SAS backplane, control
panel board, and the optical drive.
17 Route the power/data cables along the chassis wall. See "Front-Chassis
Assembly" on page 90.
18 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 89.
19 Close the system. See "Closing the System" on page 77.
20 If applicable, replace the front bezel. See "Installing the Front Bezel" on
page 75.
21 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
book.book Page 148 Wednesday, December 18, 2013 2:48 PM