Figure 4, Backplane connector. see, Installing the power supply – Dell PowerVault 725N (Rackmount NAS Appliance) User Manual

Page 31

Text mode
Original mode

Figure 4-8. Removing and Replacing the 230-W Power Supply

Figure 4-9. Removing and Replacing the 250-W Power Supply

Installing the Power Supply

To install the replacement power supply, insert the rear guide pins on the power supply into the guide-pin slots on the chassis, lower the power supply

CAUTION:

See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting

against electrostatic discharge.