Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 21)

Table 5-1. System Board Jumper Settings
System Board Connectors
See Figure 5-3 and Table 5-2 for the location and description of system board connectors.
Figure 5-3. System Board Connectors
Jumper Setting Description
PASSWD
pins 1 and 2 The password feature is disabled.
(default)
The password feature is enabled.
NVRAM_CLR
pins 3 and 4
(default)
The configuration settings are retained at system boot.
The configuration settings are cleared at next system boot. (If the configuration settings become corrupted to the point
where the system will not boot, install the jumper and boot the system. Remove the jumper before restoring the
configuration information.)
jumpered
unjumpered