Crestron electronic Green Light GLPS-HSW-FT - Manual (Page 29)

Crestron Commercial Lighting Design Guide
25
Power Sw
itching
Module Specifications
GLXP-SW10 and GLXP-SW16
The GLXP-SW10 and GLXP-SW16 are Crestron Green Light switching modules which feature 10 or 16 channels of power switching with
rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel.
> 10 or 16 channels of power switching
>
Mechanically-latching relays
> Supports 100 to 277 Volt applications
> 16 Amp, 1 HP load rating per channel
> Positive air gap at each output
> Phase-independent channels
> Cresnet communications
>
Redundant power capability—module powered via line or
Cresnet
> Local controls for testing and verification
> Local and remote override capability
> Non-volatile power failure memory
Load Ratings
Switch Channels 10 or 16
Per Channel 16 Amps at 100-277 Volts AC, 50/60 Hz
0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
Switch Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent
Ballast, High-Intensity Discharge, Motor
Relay Lifetime Resistive rating: 100,000 on/off operations, 50A @ 277 VAC
General rating: 50,000 on/off operations, 16A @ 120/277 VAC
Power Requirements
Primary 100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
Secondary (optional) 5 watts at 24 Volts DC, supplied via Cresnet®
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 136 BTU/Hr
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or
other capacitive loads)
Module SCCR Rating - 18kA
CE
The GLXP-SW10 and GLXP-SW16 are Crestron Green Light switching modules which feature 10 or 16 channels of power switching with
rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel.
> 10 or 16 channels of power switching
> Mechanically-latching
relays
> Supports 100 to 277 Volt applications
> 16 Amp, 1 HP load rating per channel
> Positive air gap at each output
> Phase-independent channels
> Cresnet communications
>
Redundant power capability—module powered via line or
Cresnet
> Local controls for testing and verification
> Local and remote override capability
> Non-volatile power failure memory