Crestron electronic Green Light GLPS-HSW-FT - Manual (Page 27)

Crestron Commercial Lighting Design Guide
23
Power Switching
GLPS-C Panels
For power switching panels with mixed module types, a “C” is attached to the model name (denoting custom). The quantity of each
module type is specified within the product name.
GLPS-C Panel Naming System
When ordering a GLPS-C panel, construct a model name as shown above. Possible choices are listed underneath each blue or gray box.
The gray boxes represent the modules and may be eliminated from the model name if not used. The numbered steps below describe
each choice in detail.
Example: GLPS-C-3HSW8-1FLV8-MCB100-120-65k
1. Feed Type
GLPS-C-___-___-___-___-___-___-___-___
MLO Main Lug Only with 20A branch breakers
MCB60 60A back-fed main circuit breaker with 20A branch breakers
MCB80 80A back-fed main circuit breaker with 20A branch breakers
MCB100 100A back-fed main circuit breaker with 20A branch breakers
MCB125 125A back-fed main circuit breaker with 20A branch breakers
2. Quantity of Each Module
GLPS-C-___-___-___-___-___-___-___-___
In the table below are the possible module choices. When designing the cabinet, select quantities of these five modules. A SW module
wires 10 or 16 loads, an HSW module wires 8 or 12 loads, and an FLV module wires 8 loads.
Modules
SW10 SW16 HSW8 HSW12 FLV8
Size (see page 28) 2 MU 3 MU 2 MU 3 MU 3 MU
# of Loads 10 16 8 12 8
Switching Relay
Types
High-inrush High-inrush Arcless high-inrush Arcless high-inrush Arcless high-inrush
Voltages 120/230/277 120/230/277 120/230/277 120/230/277 120/230/277
Lighting Output
Capacity
16A 16A 16A 16A 16A
Motor Output
Capacity
(120/230/277 V)
1/2/2 hp 1/2/2 hp 0.5/1/1 hp 0.5/1/1 hp 0.5/1/1 hp
Rated Relay Lifetime Up to 100,000 Up to 100,000 1,000,000 1,000,000 1,000,000
Additional Module
Info
Page 25 Page 25 Page 26 Page 26 Page 27
GLPS-C
- # of SW16
Modules
Feed Type
# of HSW8
Modules
Voltage AIC Rating
- - -
120
277
10K
18K
22K
35K
65K
-
1SW16
2SW16
3SW16
MLO
MCB60
MCB80
MCB100
MCB125
# of SW10
Modules
-
1SW10
2SW10
3SW10
4SW10
5SW10
1HSW8
2HSW8
3HSW8
4HSW8
5HSW8
-
# of HSW12
Modules
1HSW12
2HSW12
3HSW12
- # of FLV8
Modules
1FLV8
2FLV8
3FLV8
What is Arcless Switching?
Crestron offers two switching relay types: high-inrush and arcless high-inrush. Arcless high-inrush relays use a TRIAC to handle the
current turn on. Within milliseconds, the continuous load is transferred from the TRIAC to a robust 50A mechanically-latching relay.
All switching occurs at the zero-cross point of the AC waveform under microprocessor control. This is a complete solution
eliminating arcing at the physical relay contacts during turn on and turn off. By eliminating arcing, the relay lifetime is increased
substantially.