Installing the cable-management arm, Routing cables – Dell PowerEdge 1750 User Manual

Page 32

1-26

Ra c k I n s t a l l a t i o n G u i d e

www

.dell.com | support.dell.com

Press the slide release latch at the side of each slide and push the system completely
into the rack (see Figure 1-18).

Push in and turn the captive thumbscrews on each side of the front chassis panel to
secure the system to the rack.

Installing the Cable-Management Arm

See "Installing the Cable-Management Arm" in "Four-Post Rack Installation."

Routing Cables

See the procedure "Routing Cables" in "Four-Post Rack Installation."

You have completed the installation of the rack kit in a two-post rack.

5X860eb0.fm Page 26 Monday, October 21, 2002 11:49 AM