Canon IR1600 - Manual (Page 61)

3-11 Changing the Current Standard Settings
Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
1
Enter the Additional Functions menu and open the <2.COPY SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Setting the Standard Exposure,” on p. 3-3.
2
Press or to select <7.SHARPNESS>, and press .
When you press , the menu appears.
3
Press or to set the desired sharpness level, and press .
To copy an original in text and lines, select a high sharpness level.
To copy an original with halftone images such as a photograph, select a low sharpness level.
When you press , the selected sharpness level is stored and the display returns to the
SETTINGS> menu.
NOTE
• You can set the sharpness in the range from 1 to 9.
• <9> is the lowest sharpness level and <1> is the highest.
4
Press (Stop) to return to the standby mode.
COPY SETTINGS
7.SHARPNESS
SHARPNESS
5