Canon IR1600 - Manual (Page 58)

Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
3-8 Changing the Current Standard Settings
Setting the Automatic Collate On/Off
This mode allows automatic selection of the Collate (Offset Collate) mode when the original is
placed in the feeder. This is helpful when making multiple copies, because you do not need to
remember to select the Finisher mode.
NOTE
•
The default setting is .
• This function is available only when the Feeder (ADF-J1) is attached.
1
Enter the Additional Functions menu and open the <2.COPY SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Setting the Standard Exposure,” on p. 3-3.
2
Press or to select <5.AUTO SORT>, and press .
When you press , the menu appears.
3
Press or to select or , and press .
If you want the machine to collate automatically, select .
If you do not want the machine to collate automatically, select .
When you press , the specified mode is set and the display returns to the menu.
4
Press (Stop) to return to the standby mode.
COPY SETTINGS
5.AUTO SORT
AUTO SORT
ON