Canon IR1600 - Manual (Page 31)

1-25
B
a
sic Cop
y
ing
1
Interrupting the Current Job to Make Priority Copies (Interrupt Mode)
Interrupting the Current Job to Make Priority
Copies
(Interrupt Mode)
The Interrupt mode enables you to interrupt the reserved or current job long enough to make higher
priority copies. This mode is useful when making a rush copy during a long copy job.
NOTE
•
You can make interrupt copies when the machine is ready to scan.
• You cannot set the copy mode for the interrupt copy during scanning.
1
Press (Interrupt).
(Interrupt) lights.
When you want to copy after changing the Department ID while Department ID Management is enabled,
press
and enter the Department ID and Password. (See the Reference Guide.)
NOTE
• Even when you press (Interrupt), the job currently being output will not be interrupted until the interrupt copy starts
printing.
2
Place your original, and set the desired copy mode and quantity (1 to 99).
3
Press (Start).
The Interrupt copy job starts.
NOTE
• To cancel the Interrupt mode, press (Stop), and select the job to be canceled.
ID