Canon IR1600 - Manual (Page 45)

2-13 Erasing Shadows and Frame Lines from Copies (Frame Erase)
U
s
ef
u
l C
o
p
y
Fu
nc
ti
on
s
2
IMPORTANT
• Do not place originals with binding holes in the feeder, as it may damage the originals.
2
Press or to select <3.HOLE PUNCH ERASE>, and press .
3
Press or to select the size of the original, and press .
NOTE
• You can set the Binding Hole Erase mode only on the original sizes shown on the display.
4
Press or to select the binding hole erase width, and press .
You can also use the numeric buttons to enter the binding hole erase width.
When you press , the standby display appears.
NOTE
• You can set the width from 3 mm to 20 mm.
•
The default setting is 18 mm.
•
The machine selects the paper according to the original size you set in step 3 and the selected paper size is displayed.
FRAME ERASE FEATURE
3.HOLE PUNCH ERASE
ORIGINAL SIZE
A3
FRAME ERASE WIDTH
18mm