A3 text – Canon IR1600 User Manual
Page 44
U
s
ef
u
l C
o
p
y
Fu
nc
ti
on
s
2
2-12
Erasing Shadows and Frame Lines from Copies (Frame Erase)
NOTE
•
You can set the book frame erase width in the range from 3 mm to 50 mm.
•
The default setting is 10 mm.
•
The machine selects the paper according to the original size you set in step 3 and the selected paper size is displayed.
5
Enter the desired copy quantity (1 to 99) using the numeric buttons.
For details about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-7.
6
Press
(Start).
Copying starts.
NOTE
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
•
If you press
(Stop), the cancel job display appears. Select
or
.
•
If you press
(Stop) after copying has started, some sheets of blank paper may be output.
•
Set the frame erase width around the original using the <2.COPY SETTINGS> menu in the Additional Functions
menu. You can set from 1 mm to 20 mm. (See “Setting the Standard Frame Erase Width,” on p. 3-7.)
Making Copies Erasing Binding Holes etc. (Binding
Erase)
1
Place your original, enter the Special Features menu, and open the FEATURE> menu.
For details about the procedure above, see steps 1 to 3 of “Making Copies Erasing the Frame of the
Originals (Original Frame Erase),” on p. 2-9.
100%
✱
A3
TEXT
01
CANCEL COPYING?
< YES
NO >
FRAME ERASE FEATURE
1.DOC. FRAME ERASE