Cancel copying? < yes no – Canon IR1600 User Manual
Page 12
B
a
sic Cop
y
ing
1
1-6
Flow of Copy Operations
NOTE
•
If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job is
completed.
•
When scanning is completed, remove the original.
•
If you have set the Department ID Management, press
. (See the Reference Guide.)
•
If the optional Card Reader is attached, remove the control card. (See the Reference Guide.)
●
When you want to reserve a copy job while the machine is printing:
▼
Place the original and press
(start). (See “Reserving a Copy Job While Printing,” on
p. 1-23.)
●
When you want to cancel a copy job:
▼
Press
(Stop).
▼
Press
or
to select
NOTE
•
After you have pressed
(Stop), several copies may be output from the machine.
•
You can also stop a copy job in the Monitor screen. (See the Reference Guide.)
●
When you want to interrupt a copy job:
▼
To interrupt a copy job when you need to make priority copies, press
(Interrupt).
For instructions on explaining how to interrupt a copy job, see “Interrupting the Current Job
to Make Priority Copies (Interrupt Mode),” on p. 1-25.
CANCEL COPYING?
< YES
NO >
ID