Canon PowerShot G10 - Manual (Page 68)

66
You can select which LCD monitor display modes are enabled when
the DISP. button is pressed, as well as select which of the following
information is displayed in each mode.
Customizing Display Information
Available Shooting Modes p. 298
LCD/Viewfinder
(
/ / )
Select whether to enable or disable each of the display
modes for the LCD (Display 1/Display 2/No display).
The display switches between each enabled display
mode with each press of the DISP. button (p. 63) . A
display mode that is disabled will not appear when you
press the DISP. button.
Shooting Info Displays shooting information (p. 49) .
Grid Lines Displays grid lines to divide the screen into 9 parts.
Helps confirm the vertical and horizontal positioning of
the subject (p. 49) .
3:2 Guide Helps confirm the print area for a 3:2 print*. Areas
outside the printable area are grayed out (p. 49) .
* Images are still recorded at the standard aspect ratio of 4:3.
Histogram Shooting Mode: / / /
Displays histogram (pp. 49 , 52) .
1
Select [Custom Display].
1. Press the MENU button.
2. In the
menu, use the or
button to select [Custom Display].
3. Press the button.