Canon PowerShot G10 User Manual
Page 297
295
Addendum
11
Turn the mode dial to the desired mode.
• The maximum flash synchro shutter speed is 1/250 second.
• The flash will automatically adjust its output when [Flash Mode]
is set to [Auto].
• When [Flash Mode] is set to [Auto] the flash exposure
compensation can be adjusted. When [Flash Mode] is set to
[Manual], the flash output can be adjusted
• When exposure compensation settings are selected on both the
camera and the flash (when in E-TTL mode), the settings on the
flash takes precedence and the camera setting is overridden.
• In
mode or when [Flash Mode] is set to [Manual], the output
of an externally mounted flash can be adjusted in the flash
output adjustment screen
. For the optimum aperture
values and ISO speeds for the distance to the subject, refer to
the guide number listed in the flash’s user guide (the flash’s
setting takes precedence). When making adjustments using the
flash-side controls, set the flash to manual mode. You can also
adjust the flash output even when the camera is set to the E-
TTL automatic flash exposure compensation mode by changing
the flash exposure compensation setting.
12
Press the button, use the or button to
select macro mode, and then set [ND Filter] to
[On].
• Macro mode
13
Configure the externally mounted flash
• The items that can be configured are the same as those for
Speedlite 220EX.
Be sure that the cords from the Off Camera Shoe Cord, Macro
Ring Lite or Macro Twin Lite do not obstruct or interfere with
the flash.