Canon PowerShot G10 - Manual (Page 218)

216
Configuring the Camera
This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor.
Power Saving Function
Auto Power Down When set to [On], the power will shut off in the
following circumstances. Press the power button again
to restore power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera.
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
Display Off In shooting mode, the LCD monitor automatically turns
off after the selected time if no control is accessed,
regardless of the [Auto Power Down] setting. Press
any button other than the power button or change the
camera orientation to turn the LCD monitor back on.
1
Select [Power Saving].
1. Press the MENU button.
2. Use the
or button to select the
menu.
3. Use the or button to select
[Power Saving].
4. Press the button.
2
Make settings.
1. Use the or button to select an
option.
2. Use the or button to make
settings.
3. Press the MENU button.