Canon PowerShot G10 - Manual (Page 236)

234
When the power is turned on
“Card locked!” message appears.
The SD memory card’s or
SDHC memory card’s
write protect tab is set to
“Write protect”. z When recording to, erasing from or
formatting the memory card, slide the
write protect tab upward
(p. 256) .
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low. z Recharge the built-in battery
immediately
(p. 10) .
LCD monitor/Viewfinder
Nothing displays.
The LCD monitor is set not
to display. z Press the DISP. button to turn on the
LCD monitor
(p. 63) .
[Power Saving] is set to
[Display Off]. z Press any button other than the power
button or change the camera
orientation to turn the LCD monitor
back on
(p. 216) .
Camera screen is black at start-up.
Incompatible image has
been selected as the
startup image in the My
Camera settings. z Change the start-up image in the My
Camera settings
(p. 230) or use the
supplied software program
ZoomBrowser EX or ImageBrowser to
restore the default settings.