Bio-Rad Microplate Manager Software - Manual (Page 32)

Setting Up a Protocol
24
Setting up a Protocol
Setting up protocols automates your test processes. Parameters for frequently-run
assays can be set up and saved once, and used whenever the assay is performed.
To set up a assay protocol, follow these steps:
1. Set up a Template
2. Select Instrument Setup settings
3. Select Instrument Controls
4. Enter Assay Info
5. Select an Analysis Option
6. Select Report Options
7. Name and Save the Protocol
A template must always be
present in order to see any
Result Data or Data in the
Table.
Define blank as # on the
template to have it
automatically subtracted from
raw data. In Result Data view
the blank is subtracted.
Standard
Sample