Bio-Rad Microplate Manager Software - Manual (Page 15)

Installation and Instrument Setup
7
¾
If filters are added, removed, or their positions changed, the changes must be entered
on the iMark reader keypad, so that filters are displayed properly in MPM 6.
Entering Filters
On the iMark Keypad:
1. Click the Edit button.
2. Press down arrow button 2 times to select Filters, and press the Enter button.
3. Using the keypad, select numbers by using arrow buttons to move through
positions 1-8.
4. Press the Enter button to save settings.
5. Press Main button to put reader back into ready mode.
In Microplate Manager 6:
6. Click Reload Filter on the Instrument Setup dialog.