Bio-Rad PharosFX™ and PharosFX Plus Systems - Manual (Page 39)

Appendix 1
PharosFX System Specifications
System Technical Specifications Specification
Linear dynamic range 1:65535
Pixel resolution 50, 100, 200 or 800 µm, selectable
Image resolution 2 line pairs/mm or 250 µm
Pixel density 16-bit (0–65,535)
Signal decay 32 P 50% retention in 24 hr
Scanning area 35 x 43 cm
Main Component Specifications
Laser Scanner Specification
Dimensions 69 (D) x 59 (W) x 30.25 (H) cm
Construction Molded plastic housing, Aluminum mounting plates
Excitation source 532nm Diode Pumped Solid State Laser 15 mW
Weight 30 kg
Electrical
Maximum power
650 Watts
Input voltage range 90–260 VAC, 50–60 Hz
Fuses No user-serviceable fuses
Operating Requirements 10–32°C, 30–80% humidity
Storage Requirements 0–60°C, 10–90% humidity
External Laser Module Specification
Dimensions 61 (deep) x 31 (wide) x 41 (high) cm
Construction Welded 16 Gauge steel
Weight 30 kg
Electrical
Input voltage range
100/120 VAC, 50–60 Hz
220/240 VAC, 50–60 Hz
Fuses 6.3 Amp (100/120 VAC)
3.15 Amp (220/240 VAC)
Excitation Source
Option I 488 nM, 10 mW, Ar-ion Laser
Option II 488 nM, 10 mW, Ar-ion Laser and 635 nm,
10 mW Laser Diode
Operating Requirements 10–40°C, 0–90% humidity
Storage Requirements 0–50°C, 0–90% humidity
Screen Eraser-K Specification
Dimensions 35 (D) x 48 (W) x 57 (H) cm
Construction Molded plastic
Weight 8.6 kg
Electrical
Input voltage range 100/120 VAC, 50–60 Hz
220/240 VAC, 50–60 Hz
Fuses 6.3 Amp (100/120 VAC)
3.15 Amp (220/240 VAC)
Illumination 4 x 15 Watt user-replaceable fluorescent bulbs
Operating Requirements 10–32°C, 30–80% humidity
Storage Requirements 0–60°C, 10–90% humidity
35