Bio-Rad Experion Protein Analysis Kits User Manual
Page 8
Before running any of the tests:
•
Watch the Experion Training Video: Chip Loading (supplied with this kit and available
at www.bio-rad.com/experion/)
•
Clean the electrodes as detailed in Appendix B
Note: If this is the first time the Experion electrophoresis station is being used, refer to
Appendix C for instructions on how to prepare the system for use.
Experion Pro260 Starter Kit Test Workflow
Equilibrate the reagents
Filter the gel and prepare the gel-stain solution
Prepare the BGG dilutions
Prepare the sample buffers
Prepare the samples and the Pro260 ladder
Prime the chip
Load the chip
Perform the run within 5 minutes of chip loading and analyze the data
Set up the electrophoresis station
4
10010510A.qxp 2/13/2008 11:43 AM Page 4
This manual is related to the following products: