Bio-Rad T100™ Thermal Cycler - Manual (Page 24)

Starting a Run
14
The Saved Protocols screen is organized into three panes:
• The Folders pane displays all folders on the instrument and the USB flash drive if a
USB flash drive is connected
• The Files pane displays all the protocol files in the selected folder
• The Preview pane displays a preview of the selected protocol file
To select and run a specific protocol:
2. Touch any folder to view the protocols in the folder.
3. Touch any protocol to view a preview of the protocol.
4. Touch Run. The instrument confirms the run and the sample volume (Figure 16).
5. Touch OK to run the protocol, or touch Volume to edit the sample volume.
Figure 16. The run confirmation window.
6. The Status screen opens (Figure 17). The run progress can be monitored in two views:
• Status— a graphical view of the protocol and the current step in progress (Figure 17)
• Clock— a large display of the time remaining for convenient monitoring (Figure 18)
7. Touch View Status or View Clock to toggle between the two views:
Figure 17. The Status screen.