Bio-Rad T100™ Thermal Cycler - Manual (Page 22)

Saving a Protocol
12
To change the lid temperature:
1. From the New Protocol screen, touch the Lid field.
2. Using the numeric keypad, enter the lid temperature and touch OK.
Saving a Protocol
To save a new or modified protocol:
1. From the New Protocol screen, touch Save.
2. Name the protocol by typing a name up to eight characters using the alphanumeric
keypad (Figure 14)
NOTE: Saving the protocol with the same name replaces the original protocol.
Saving the protocol with a new name adds a new protocol and does not affect the
original protocol.
3. Select the destination folder in which to save the protocol from the drop-down box. The
default location is the MAIN folder. Alternatively, touch the new folder icon to save the
protocol in a new folder.
4. Touch Save to save the protocol and return to the New Protocol screen.
Figure 14. The protocol is saved as STDGRAD in the EVA folder.