Baseline Systems FlowStation - Manual (Page 41)

Baseline FlowStation User Manual
Viewing Operator Messages
1. Press the RUN button.
2. Press the BACK button. The Status Report menu displays.
3. Press the  or  button to highlight View
Messages, and then press the OK button. The
View Messages screen displays.
Note: Messages notify you when something
in your system needs your attention, such as
an error on the controller that affects all
programs, a disconnected controller, or a
flow fault. When your system is operating as
expected, the View Messages screen indicates that there are no messages.
4. Perform any of the following options:
 If the FlowStation indicates that there are multiple messages, press the  button to
display each message.
 If you no longer need the message, press the OK button to clear it.
IMPORTANT NOTE! Most messages that display on the FlowStation are sent from one of the
BaseStation 3200 irrigation controllers in the shared flow group. If you clear a message on the
FlowStation, the message will reappear on the FlowStation until the error condition is cleared
on the controller.
5. To return to the Status Report menu, press the BACK button.
4 – Configuring the FlowStation Page 37