Baseline Systems FlowStation - Manual (Page 17)

Baseline FlowStation User Manual
Understanding Controller Statuses
The following icons identify the status of the controllers in the shared flow group:
Icon Status Description
Unassigned No controller is assigned
Done The complete cycle has finished for this controller – including
watering and soaking
Waiting The controller is scheduled to run, but currently it is not
watering or soaking
Watering Watering is in progress
Soaking The controller finished watering a zone and it is now soaking
Paused A pause condition is in effect
Disabled or
Disconnected
The controller is marked as being disabled or disconnected from
the FlowStation
Message There is a message associated with this controller
Assigning the Shared Flow Devices
Assigning Controllers to the Shared Flow Group
IMPORTANT! You must connect the controllers to the FlowStation before you can assign
them. Refer to Connecting a BaseStation 3200 Controller to the FlowStation on page 4.
1. On the FlowStation, press the Search & Assign button. The Assign menu displays.
2. Press the  button to highlight the Controller option, and then press the OK button to select
it. The Controller menu displays.
3. If the Device Assignment option is
highlighted, press the OK button to select it.
If Device Assignment is not highlighted, press
the  or  button to highlight it, and then
press the OK button. The Controller
Assignment screen displays.
4 – Configuring the FlowStation Page 13