Baseline Systems FlowStation User Manual
Page 32
Baseline FlowStation User Manual
1. Download the firmware from the Baseline web site.
a. Plug a USB drive into a USB port on a computer that is connected to the Internet.
b. Go to the Baseline web site at the following URL:
c.
On the home page, click Support.
d. In the left navigation bar, click Firmware Version Updates.
e. Click the FlowStation tab.
f.
Click the button to download the firmware upgrade.
g. When prompted, choose the Save As option. The Save As dialog box displays.
h. Find the USB drive in the list of drives and folders, and then double-click to select it.
i.
Click Save.
j.
Close the Windows Explorer window for the USB drive.
k. In the System Tray area of your Windows Desktop, click the option to Safely Remove
Hardware and Eject Media.
l.
When the Safe to Remove Hardware message displays, unplug the USB drive from the
computer.
2. Update the firmware on the FlowStation.
a. On the FlowStation, plug the USB drive that has the Update file on it into the USB port.
b. Press the System Setup button. The System Setup menu displays.
c.
Press the button to highlight the Firmware Update option, and then press the OK
button to select it. The Firmware Update menu displays.
d. The USB Update option should be highlighted. If it is not highlighted, press the button
to highlight it, and then press the OK
button to select it. The USB Update
screen displays.
The FlowStation reads the contents of
the USB drive and displays the update
information in the Status field. When
the update file is available, the status
line reads “Update File is OK.”
e. Press the + button to apply the update. When the update is complete, the FlowStation
restarts and briefly displays the new firmware version.
f.
Unplug the USB drive from the port on the FlowStation.
Page 28
4 – Configuring the FlowStation