Baseline Systems FlowStation - Manual (Page 18)

Baseline FlowStation User Manual
4. The serial numbers of all connected controllers display in the Action column. Press the  or 
button to move through the list of controllers in the Action column. Highlight the serial
number of the controller that you want to assign to the shared flow group.
5. Press the  button to move to the Controller column.
6. Press the  or  button to move through the list of controllers. Highlight the number that
you want to assign the controller to.
7. Press the OK button to select the highlighted
controller number. The serial number of the
controller that you selected in the Action
column now displays next to the number in
the Controller column.
Note: The next serial number in the Action
column is automatically highlighted. Press the

or  button in the Controller column to
move to the next zone that you want to assign, and then press the OK button.
8. Continue until you have assigned all the controllers that you want to be part of this shared
flow group.
Enabling/Disabling an Assigned Controller
1. On the FlowStation, press the Search & Assign button. The Assign menu displays.
2. Press the  button to highlight the Controller
option, and then press the OK button to
select it. The Controller menu displays.
3. Press the  button to highlight the Device
Setup option, and then press the OK button
to select it. The Controller Device Setup
screen displays.
4. In the first column, press the + or - button to
select the number of the controller that you want to enable or disable.
5. Press the  button to move to the Enabled field. A checkmark in the field means that the
controller is enabled in the FlowStation. A blank field means that the controller is disabled. To
change the setting, press the OK button.
Assigning Booster Pumps
IMPORTANT! You must assign the booster pump to the FlowStation in the BaseStation 3200
before you can assign it in the FlowStation. Refer to Assigning Booster Pumps to the
FlowStation on page 9.
1. On the FlowStation, press the Search & Assign button. The Assign menu displays.
Page 14 4 – Configuring the FlowStation