Baseline Systems FlowStation - Manual (Page 40)

Baseline FlowStation User Manual
Understanding Mainline Statuses
The following icons identify the status of the mainlines:
Icon Status Description
Off The mainline is off
Running The mainline is currently running
Learn Flow The mainline is doing a learn flow for a controller
Manual Run The mainline is doing a manual run for a controller
Disabled The mainline is marked as being disabled
Budget The mainline has a POC that is over budget
Empty The mainline has an empty POC
Flow Fault The mainline has a POC with a flow fault
Viewing Additional Mainline Status Details
1. Display the POC Status Report as described in the Viewing the POC Status Report topic above.
2. Press the  button. The POC Status details
for the first POC display.
 Mainline ID – The sequential number
assigned to the mainline in the
FlowStation
 Status – The current status of the
mainline
 Actual Flow – The amount of water that is currently flowing through the mainline shown
in gallons per minute (GPM)
 Total Usage – Shows the sum of all water usage on the connected flow meters in gallons
 Assigned Flow – Shows the amount of flow assigned to this mainline
 Assigned Concurrent – Shows the number of concurrent zones assign to this mainline
3. Perform one of the following actions:
 To view the status details for the next mainline, press the  button.
 To return to the Status Report menu, press the BACK button.
Page 36 4 – Configuring the FlowStation