B&G Triton Display - Manual (Page 42)

40 |
Autopilot | Triton Operation Manual
Autopilot symbols
More autopilot modes may be available via a compatible chartplotter connected to the
network. Any autopilot mode selected via the chartplotter will be shown on the display.
Below is a list of autopilot modes and their display symbols accessible via the Pilot controller.
Mode Symbol Function / Mode
S
Standby
A
Auto (Compass)
W
Wind
N
Navigation
NFU
Non Follow Up (Power steer)
ND
NoDrift
¼ Note: The autopilot mode can be selected or changed at anytime via the controller or
compatible chartplotter connected to the network.
Selecting an autopilot mode
Press the ‘Auto’ key to engage the autopilot. Press the ‘Mode’ key to enter Wind or NoDrift
mode (depending on boat type). Press and hold the Mode key to activate Navigation mode.
¼ Note: Wind mode can only be selected when the autopilot boat type is set to sail.
¼ Note: The autopilot must be engaged in Auto mode before other modes can be selected.
¼ Note: Press the ‘Auto’ key to enter Auto mode or accept a tack/gybe or navigation course
change. Press the ‘STBY’ key to place the autopilot into Standby mode.
3 SEC
Boat Type:
• Displacement
• Outboard
• Planing
Boat Type:
• Sail
¼ Note: The display will not update until the autopilot engages the new selected mode.