B&G Triton Display - Manual (Page 28)

26 |
Setup | Triton Operation Manual
Manual adjustment of boat speed
Adjust the boat speed manually by selecting the Boat speed percentage slider. Adjust the
percentage up or down as desired. Confirm the value. Select OK once complete.
Distance Reference
This facility enables the user to calibrate the log accurately and simply. Calculations are
performed by the display that works out the boat speed over a known distance.
To calibrate the boat speed via a distance reference you will need to complete consecutive
runs, under power at a constant speed made along a given course and distance.
¼ Note: To eliminate the effect of tidal conditions it is advisable to perform at least two runs,
preferably three, along the measured course.
How To Calibrate via Distance Reference
Enter the desired distance in nautical miles that you would like to calculate the distance
reference over.
When the boat gets to the predetermined starting position of the distance reference
calculation start the calibration timer.