B&G Triton Display - Manual (Page 18)

16 |
Operation | Triton Operation Manual
Reset Timer
Selecting Reset timer will reset the timer to the start value. If the timer was running, it will
continue to run from the start value.
Start Trip on Running
When selected the trip log will record your time and millage from the moment the
countdown clock begins counting up from zero.
Nearest Full Minute
When the timer is counting down selecting Nearest Full Minute will synchronize the time up
or down to the nearest full minute.
Log
The Log page presents the following information:
1
2 3
4
1 Current trip distance
2 Current time
3 Total logged distance
4 Current date
The log shows the current time and date, total recorded distance for the instruments life time
and trip log showing total distance travelled from the time of the trip reset and the selection
of Start trip. Once started it will change to Stop trip. The trip log counter will continue to
count up until it is stopped.
¼ Note: The Log and Date cannot be reset. The date is taken from the global time and date
settings. The time can be set to correspond with your global position.