B&G Triton Display - Manual (Page 36)

34 |
Setup | Triton Operation Manual
System
From the system menu there are several options to reset the system, place the display into
simulator and get the current software information.
Reset options
There are a variety of reset options available from the system menu.
¼ Note: Whenever a reset option is selected there will be a dialog box asking you to confirm
that you wish to reset before any further action is taken. If you wish to cancel the reset, select
No will return you to the system menu.
Network reset
Resets the source selection on all displays connected to the network.
Autopilot reset
Resets the Pilot and returns all settings to factory defaults.
Warning: The Pilot will need to be commissioned before it is fit for
purpose. Do not engage the autopilot until it has been commissioned
and a sea trial has been completed.
Reset to Factory
Resets the current display to the default settings. When the unit is restarted you will see the
original startup wizard asking you to set the display.
Warning: All settings for instrument and Pilot will be restored to fac-
tory default. The Pilot will need to be commissioned before use.