Great Plains NP30A 30-foot Predelivery Manual - Manual (Page 40)

407-313Q Table of Contents Index 08/30/2011
36 NP30 or NP40 Table of Contents Index Great Plains Manufacturing, Inc.
Pre-Delivery Closeout
Stow Spacers
This topic applies to 2-Point models only. For 3-Point and
Pull-Type, continue at “Pre-Delivery Closeout” on
page 36.
181. Select two sets:
810-242C STROKE CONTROL SPACERS 1 1/8
182. Clip each set around the wire loop on each of the
two lift-assist mounts.
Stow Documents
Place all documents in the Manual-Pak™
1
.
Remove Pre-Assembly Markings
Remove all part tags. Wipe off all grease pencil part
numbers.
Final Inspection
183. Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
184. Check that all grease fittings are in place and lubri-
cated. See “Lubrication and Scheduled Mainte-
nance” in the Operator manual.
185. Check that all safety decals and reflectors are cor-
rectly located and legible. Replace if damaged. See
“Safety Decals” in the Operator manual.
1. Manual-Pak™ is a trademark of Custom-Pak, Inc.
Figure 50
Lift-Assist Spacers
31636
78
2
78
2