Appendix b - pre-delivery, Mount ground drive wheel – Great Plains YP825A Operator Manual User Manual
Page 159

2014-08-15
401-651M
Great Plains Manufacturing, Inc.
155
Appendix B - Pre-Delivery
This Appendix covers setup tasks performed by the
dealer prior to delivery. These items need to be
completed prior to any items in Appendix C (some of
which may also be performed by the Great Plains
dealer).
a.
Partially deploy ground drive (this page).
b.
Attach tongue to frame (page 156).
c.
Install press wheel assemblies (page 158).
d.
Engage ground drive spring (page 158).
e.
Mount Fertilizer boom (option, page 159).
f.
The planter mainframe includes shipping stands which
are returned to Great Plains after the tongue is attached.
Mount Ground Drive Wheel
The ground drive wheel is shipped loose. It must be
bolted to the hub.
Sharp Object Hazard:
Use a hoist or two people. Wear gloves. The wheel is heavy
and the tines are sharp.
Refer to Figure 134
1.
Select one:
407-473D GROUND DRIVE WHEEL
and three sets:
802-331C RHSNB 1/2-13X1 3/4 GR5
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
2.
At the ground drive hub
, orient the wheel so that
at the top, the vertical face of the top tooth is to the
rear, and the longer angled face is to the front.
3.
Secure the wheel
to the hub with bolts
, lock
washers
and nuts
.
Figure 134
Install Ground Drive Wheel
31719
41
42
43
44
40
41
42
44
43
40
41
42
44
43