Great Plains 3N-4025P Operator Manual - Manual (Page 51)

4/23/2010 196-286M
49 Adjustments
Refer to Figure 64
7. Be sure slots in the center of seed meter
wheel are aligned with the wheel drive pin on
the meter shaft.
Refer to Figure 65 (a) and (b)
8. Reinstall spring and knob in place. (a)
9. Close and pin seed meter clean out. (b)
Refer to Figure 66
10. Open sliding seed tubes and pin in place.
Wheel
drive pin
18299
Knob
19192
a
b
18300
Figure 64
Figure 65
Figure 66