Install tractor steering harness for linear sensor, Resume at “ install tractor steering harness for – Great Plains 3PYP Predelivery Manual User Manual
Page 53

Tractor Setup and Options 49
07/19/2011
401-312Q
Install Tractor Steering Harness for Linear Sensor
Refer to Figure 82, Figure 83 and Figure 84
22. Select one:
with integrated power and signal harnesses. Verify
the power switch (“STEER”) is still OFF.
23. Connect the power leads
24. Route the console harness
(with connectors
and
) to the tractor hitch.
25. At the tractor steering sensor
just installed,
remove the plastic cap protecting the connector at
the inboard end.
26. Select one:
833-438C HARNESS TRACTOR POSITION
Connect the round connector
of the tractor sensor
harness
to the steering sensor
.
27. Route the steering harness
to the rear hitch.
Allow slack at sensor for steering and vertical axle
movement (if possible). Keep cable clear of hot parts
and moving parts of tractor.
Allow slack at hitch for hitch movement.
Secure harnesses with cable ties.
28. Plug the 3-pin weatherpak connector
of the steer-
ing sensor harness
into 3-pin weatherpak of the
console harness
FigureSpacer:
Figure 82
Tractor Steering Harnesses
29947
2
6
4
65
5
65
4
2
2
51
Null4:
Figure 83
Linear Harness
32121
66
8
7
66
7
66
51
66
8
66
FigureSpacer:
Figure 84
Steering Sensor and Harness
29208
66
51