Great Plains 3PYP Predelivery Manual - Manual (Page 25)

Planter Assembly 21
07/19/2011 401-312Q
FigureSpacer:
Refer to Figure 34 (which depicts elevating with a strap and
forklift, and depicts the clevis attached [step 35])
32. Using a hoist, elevate each parallel arm until
roughly horizontal.
Refer to Figure 35
33. Insert the pin saved at step 29 into the lower lug
hole .
FigureSpacer:
Refer to Figure 36
34. Use the hoist to adjust the height of the parallel
arms until the lift-assist cylinder rod clevis can be
aligned with forward hole of the lug.
35. Secure with pin & hardware removed and saved at
step 31.
36. Carefully lower the hoist. The lift-assist cylinders
may or may not fully extend, depending on how
much air is in the hoses and cylinders.
FigureSpacer:
Figure 34
Elevate and Support Parallel Arm
29146
FigureSpacer:
Figure 35
Lower Lug Pin
29148
6
6
FigureSpacer:
Figure 36
Pin Lift-Assist Cylinder
29149