Unload the mainframe – Great Plains 3PYP Predelivery Manual User Manual
Page 20

16 3PYP
401-312Q
07/19/2011
Unload The Mainframe
Refer to Figure 22 and Figure 23 (which depict a three fork
lift)
5.
Double-check that all chains and tie-down straps
have been released and stowed.
6.
Make sure that all team members are fully briefed
and ready.
7.
Set parking brake on trailer tractor.
8.
Attach crane hoist lines at planned points or move
fork lifts into planned positions.
Machine Damage Risk:
Do not move lifters or crane so far in that trailer wheels will
not be able to clear them when pulling trailer out from under
planter.
Machine Damage Risk:
If using multiple lifters, do not drive the lifts fully forward into
the planter, unless the lifts are known to have precisely vertical
motion. If the load moves forward while lowering, the planter
will tend to push the lifters backward.
FigureSpacer:
Refer to Figure 23 (which depicts a three fork lift)
9.
Slowly lift the planter off the trailer bed.
10. Stop lifting about 12in above the bed.
FigureSpacer:
Figure 22
Position Lifters
25357
FigureSpacer:
Figure 23
Planter Lifted
25358
- 1200 Parts Manual (210 pages)
- 706NT Material Rate (46 pages)
- 706NT Material Rate (50 pages)
- 2N-2410 Operator Manual (56 pages)
- 2N-2410 Operator Manual (48 pages)
- 12 Series Drills Assembly Instructions (6 pages)
- X-PresS 2006 Assembly Instructions (50 pages)
- TM500 Operator Manual (62 pages)
- 2010HDP Operator Manual (166 pages)
- YP1630F Material Rate (42 pages)
- YP2425 Operator Manual (162 pages)
- 3S-5000 Operator Manual (94 pages)
- 3PYP Operator Manual (188 pages)
- 3N-3010P Assembly Instructions (2 pages)
- 3N-3010 Assembly Instructions (9 pages)
- 3N-3010P Assembly Instructions (9 pages)
- PFH-15 Predelivery Manual (23 pages)
- PFH-15 Operator Manual (46 pages)
- PFH-15 Operator Manual (26 pages)
- P15126 Serial No 12724 (34 pages)
- DVN 8321 Operator Manual (38 pages)
- 3P500 Assembly Instructions (22 pages)
- 605NT Assembly Instructions (8 pages)
- 605NT Assembly Instructions (4 pages)
- 3P600 Assembly Instructions (12 pages)
- CPH-12 Assembly Instructions (3 pages)
- YP1625A-2420 24 Row 20-Inch Quick Start (6 pages)
- 8323 FCF Predelivery Manual (124 pages)
- P13937 (20 pages)
- 3323 DH Parts Manual (114 pages)
- YP3025-1820 25 Series 18 Row 20 Inch Quick Start (5 pages)
- CF500 Operator Manual (38 pages)
- PFH-15 Assembly Instructions (30 pages)
- 3500TM Parts Manual (106 pages)
- 1800TM Parts Manual (158 pages)
- YP2425A-2470 24 Row 70 cm Quick Start (5 pages)
- Simba Culti Press Operator Manual (38 pages)
- RU1999 Parts Manual (58 pages)
- 3N-30P Assembly Instructions (10 pages)
- 2510HDP Operator Manual (180 pages)
- YP1220 Parts Manual (136 pages)
- 3P500 Material Rate (68 pages)
- YP2425-3620 36 Row 20 Inch Quick Start (5 pages)
- 706NT Operator Manual (22 pages)
- 706NT Operator Manual (53 pages)