Great Plains TCN5313 Operator Manual - Manual (Page 8)

4 TCN5107-5313 Great Plains Manufacturing, Inc.
566-170M 03/17/2014
Using This Manual
This manual will familiarize you with safety, hitching,
operation, adjustments, troubleshooting, and mainte-
nance. Read this manual and follow the recommenda-
tions to help ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Document Family
Definitions
Safety admonishment signal words are described on
page 5.
The following terms are used throughout this manual.
Identifies an Economic (not a Safety) Risk:
NOTICE provides a crucial point of information related to the
current topic. Read and follow the instructions to avoid damage
to equipment and ensure desired field results.
Note: This form sets off useful information related to the
current topic, or forestalls possible misunderstand-
ing.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number (page 1) when ordering
parts from your Great Plains dealer.
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
For further assistance contact Great Plains via the Agent
recorded on page 2, or at:
For U.K. and Europe
SIMBA Great Plains
Woodbridge Road Ind. East
Sleaford
Lincolnshire NG34 7EW England
Voice: +44 (0) 1529 304654
Fax: +44 (0) 1529 413468
Email: [email protected]
For Other Regions
Great Plains Manufacturing, Inc.
PO Box 5060
Salina KS 67402-5060 USA
Voice:+(800)255-9215
Fax:+1 785-822-6722
Email:[email protected]
566-170Q-ENG Assembly Manual
566-170Q Pre-Delivery Manual
566-170M Operator Manual (this document)
566-170P Parts Manual
U
D
F
B
L
R