Great Plains TCN5313 Operator Manual - Manual (Page 5)

03/17/2014 566-170M
Great Plains Manufacturing, Inc. 1
Equipment Identification
This Operator manual applies to the following Great
Plains pull-type primary vertical tillage chisels:
See “TCN Specifications and Capacities” on page 60
for precise swath information.
Refer to Figure 1
For positive equipment identification, consult the
machine label
located on the top of the left hand hitch
truss, near the single point depth control.
Export Models 5107-5313
Models TCN5107, TCN5309, TCN5311 and TCN5313
can be built to European regulatory and highway trans-
port standards. The machine can also be built to North
American regulatory and highway transport standards,
depending on which light option package is purchased.
Refer to Figure 2 (which is NOT from an actual machine)
The machine label provides data which is specific to your
machine as originally shipped from the factory.
If you, or the dealer, have added Options not originally
ordered with the machine, or removed Options that were
originally ordered, the weights and measurements no
longer are accurate for your machine. Update the Record
on the next page upon modifications.
See “Transporting the Turbo-Chisel” on page 31 and
“TCN Specifications and Capacities” on page 60 for
additional weights and measurements.
TCN5107 2.7m, 7-shank
TCN5309 3.43m, 9-shank
TCN5311 4.19m, 11-shank
TCN5313 4.95m, 13-shank
Figure 1
Label/Plate Location
41978
1
1
G re a t P l a i n s
Model Number: Serial Number:
Working Width m: Transport Width m: Year of Manufacture:
Total Weight kg: Axle Load kg: Drawbar Vertical Load kg:
99999 Kg 99999 Kg 99999 Kg
2011 99.9 m 99.9 m
A1196X TCN5107
Manufacturing, Inc.
P.O. Box 5060
Salina, KS 67401 USA
A1196X
* G P - 1 1 9 6 X *
819-197C
Figure 2:TCN5107:
Example Machine Label
42160