Great Plains TCN5313 Operator Manual - Manual (Page 33)

Great Plains Manufacturing, Inc. Operating Instructions 29
03/17/2014 566-170M
Lowering
Refer to Figure 22
17. Check that the transport locks are not on lift cylinders
and installed in storage position.
18. Unfold implement before lowering (page 27).
19. Make sure all persons are clear of danger zones,
e.g., coulters and chisel points.
Refer to Figure 23
Falling Hazard:
Do not stand on tires when implement is lowered as they may
have little or no weight on them, and may turn suddenly and
without warning if used as a step, resulting in serious injury.
Figure 22
Lift Lock Disengaged
41997
Figure 23
Implement Raised / Lowered
42176