Great Plains TCN5313 Operator Manual - Manual (Page 14)

10 TCN5107-5313 Great Plains Manufacturing, Inc.
566-170M 03/17/2014
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
On the back of smv post;
1 total
.
Reflectors: Red Triangles
One each rear fluorescent panel;
2 total
.
International: 818-055C North America: 818-055C
41973
International: 833-399C North America: n/a
(North American models
use
818-055C SMV reflectors,
838-614C red reflectors &
838-615C amber reflectors.)
42154