Great Plains TCN5313 Operator Manual - Manual (Page 64)

566-170M 03/17/2014
60 TCN5107-5313 Great Plains Manufacturing, Inc.
Appendix
TCN Specifications and Capacities
* Weight (values change due to installed options and/or after-market equipment), see weight configuration table
(page 32) for option packages included with machine.
** Weight values change depending on hitch position from ground
*** Available with 2” straight or 3” twisted points on chisel shanks
**** Equipped with 7” winged points on parabolic shanks
The maximum hydraulic system operating pressure should be 207 bar (3000 psi).
With a continued commitment to constantly improving our products, these specifications are subject to change without
notice.
Model No. TCN5107 TCN5309 TCN5311 TCN5313
Tillage Width
267cm (8' 9") 343cm (11' 3") 420cm (13' 9") 495cm (16' 3")
Center Section 274cm (9') 274cm (9') 274cm (9') 274cm (9')
Wing N/A 53cm (1' 9") 76cm (2' 6") 114cm (3' 9")
Number of Shanks 7 9 11 13
Shank Spacing 38cm (15") 38cm (15") 38cm (15") 38cm (15")
15 19 23 27
Blade Spacing 19cm (7.5") 19cm (7.5") 19cm (7.5") 19cm (7.5")
Weight (total)* 4526kg (9970lbs) 6000kg (13,215lbs) 6774kg (14,920lbs) 7289kg (16,055lbs)
Weight (tongue)** 113kg (249lbs) 150kg (330lbs.) 169kg (373lbs) 182kg (401lbs)
Weight (axle)** 4413kg (9721lbs) 5850kg (12,885lbs) 6604kg (14,547lbs) 7107kg (15,654lbs)
Transport Width 274cm (9') 299cm (9' 10") 299cm (9' 10") 299cm (9' 10")
Transport Height 175cm (5' 9") 287cm (9' 5") 299cm (9' 10") 312cm (10' 3")
Length (w/o attachment)
695cm (22' 10") 695cm (22' 10") 695cm (22' 10") 695cm (22' 10")
Tire Size Center 12.5L x 15" 12-ply 12.5L x 15" 12-ply 12.5L x 15" 12-ply 12.5L x 15" 12-ply
Kilowatt Chisel Shanks 125-170 150-185 170-210 200-245
Horsepower (PTO) Chisel Shanks*** 170-230 200-250 230-285 270-329
Kilowatt Parabolic Shanks
150-180 170-190 190-235 235-290
Horsepower (PTO) Parabolic Shanks**** 200-240 230-260 255-315 315-385
Number of Coulters