Great Plains YP1220 Operator Manual - Manual (Page 15)

Great Plains Manufacturing, Inc. Introduction 11
03/14/2012 401-506M
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts, and equipment specially designed for Great Plains
products.
Refer to Figure 2
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate is
located on the rear face or the right axle.
Record your Yield Pro Planter model and serial number
here for quick reference:
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
Figure 2
Serial Number Plate
27456
Model Number:__________________________
Serial Number: __________________________
YP1220-3510