Great Plains YP1220 Operator Manual - Manual (Page 14)

401-506M 03/14/2012
10 YP1220 Great Plains Manufacturing, Inc.
Introduction
Great Plains welcomes you to its growing family of new
product owners. This planter has been designed with
care and built by skilled workers using quality materials.
Proper setup, maintenance, and safe operating practices
will help you get years of satisfactory use from the
machine.
Description of Unit
The 30-foot Row Yield-Pro® Planter is pull-type planting
implement for use in conventional till, minimum-till, or
light no-till conditions.
YP1220 Yield-Pro® Planters are outfitted with 20 Series,
side-depth-control row-units.The Planter folds for trans-
port.
Document Family
401-506M Operator Manual (this manual)
401-506B Seed Rate Manual
401-506P Parts Manual
Intended Usage
Use the planter to seed production-agriculture crops
only. Do not modify the planter for use with attachments
other than Great Plains options and accessories speci-
fied for use with the planter.
Covered Models
Using This Manual
This manual familiarizes you with safety, assembly, oper-
ation, adjustments, troubleshooting and maintenance.
Read this manual and follow the recommendations to
help ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will travel
while in use unless otherwise stated.
A crucial point of information related to the preceding topic.
Read and follow the directions provided before continuing, to
ensure safety, avoidance of machine damage, and to achieve
desired field results.
Note: Useful information related to the preceding topic.
Figure 1
Left/Right Convention
27455
R
L
YP1220-3510 30-foot, 35-row, 10-inch spacing